Pinball LEDS by DRAPL
_________________________________________________________________
CBS-07
CLASSIC BALLY/STERN
LED ADAPTER
______________________________________________________________________
Classic Bally / Stern LED adapters
CBS-07
New product
LEDs on classic Bally / Stern games normally require a resister to inhibit the led from flickering. Using our adapter provides a solution that requires no soldering and easy to to install.
This will allow you to use your existing lamp driver board to run lantly led bulb olin the market making an easy process. With the easy to snap apart adapter board, we are making it more cost effective for customers to afford.
These adapters will allow you to use LED's in your classic Bally / Stern's with -17, -35, M-100 and M-200 CPU board sets.
ALTEK main lamp driver boards do not require an LED adapter, only factory original main lamp drivers require LED adapters.
Some Bally titles use additional boards to control more lamps, and require additional adapter set(s) to completely convert a game.
Spectrum: Requires 2 of this set
Space Invaders, Xenon, Flash Gordon, Eight Ball Deluxe (All versions), Fireball II, Embryon, Fathom, Medusa, Elektra, Vector, Speakeasy, Mr. and Mrs PacMan: Require 1 of this set, and one the -52 AUX board sets.
Kiss, Future Spa, Centaur, Centaur II: Require 1 of this set and one of the -42 AUX board sets
NOTE THAT THIS ADAPTER DOES NOT WORK IN THE FOLLOWING GAMES:
Gold Ball, Baby Pacman, Granny and the Gators, or Grand Slam, Paragon also seems to have issues .
Troubleshooting Addendum:
If you are experiencing issies getting the adapter to work check the bellow two possible issues.
1: Check continuity on the wiring harness.
2: Check the voltage on the spot you're attaching the alligator clip. It should be around 5.5v to 6v, if it's 3v-4v, it's way too low and the adapters won't work there. Check other lamp locations either in the backbox or even under the playfield
CBS-07
New product
LEDs on classic Bally / Stern games normally require a resister to inhibit the led from flickering. Using our adapter provides a solution that requires no soldering and easy to to install.
This will allow you to use your existing lamp driver board to run lantly led bulb olin the market making an easy process. With the easy to snap apart adapter board, we are making it more cost effective for customers to afford.
These adapters will allow you to use LED's in your classic Bally / Stern's with -17, -35, M-100 and M-200 CPU board sets.
ALTEK main lamp driver boards do not require an LED adapter, only factory original main lamp drivers require LED adapters.
Some Bally titles use additional boards to control more lamps, and require additional adapter set(s) to completely convert a game.
Spectrum: Requires 2 of this set
Space Invaders, Xenon, Flash Gordon, Eight Ball Deluxe (All versions), Fireball II, Embryon, Fathom, Medusa, Elektra, Vector, Speakeasy, Mr. and Mrs PacMan: Require 1 of this set, and one the -52 AUX board sets.
Kiss, Future Spa, Centaur, Centaur II: Require 1 of this set and one of the -42 AUX board sets
NOTE THAT THIS ADAPTER DOES NOT WORK IN THE FOLLOWING GAMES:
Gold Ball, Baby Pacman, Granny and the Gators, or Grand Slam, Paragon also seems to have issues .
Troubleshooting Addendum:
If you are experiencing issies getting the adapter to work check the bellow two possible issues.
1: Check continuity on the wiring harness.
2: Check the voltage on the spot you're attaching the alligator clip. It should be around 5.5v to 6v, if it's 3v-4v, it's way too low and the adapters won't work there. Check other lamp locations either in the backbox or even under the playfield
CBS-07 Instructions
COMING SOON
Pinball LEDS by DRAPL, creating cost effective products for the Canadian market to serve you better with you LED purchases
CBS-07 CLASSIC BALLY/STERN LED ADAPTER BOARD
- Brand: DRAPL
- Product Code: CBS-07 CLASSIC BALLY/STERN LED ADAPTER BOARD
- Availability: 91
-
$50.00