Pinball LEDS by DRAPL 

_________________________________________________________________

Seigecraft Electronics

MA-07

CLASSIC BALLY/STERN

LED ADAPTER

______________________________________________________________________

Classic Bally / Stern LED adapters

 MA-07

 New product

Adapters to LED's in your classic Bally / Stern's machines.  No soldering, no crimping, no tools required.  Converts your existing main lamp driver board to be LED compatible so you can use any pinball LED's on the market. Converts only the main lamp driver board,  but not an AUX lamp board if present.

These adapters will allow you to use LED's in your classic Bally / Stern's with -17, -35, M-100 and M-200 CPU board sets.  No soldering, no crimping, no tools required.  It converts your existing main lamp driver board to be LED compatible so you can use any pinball LED's on the market.

As pinball machines can sometimes change hands pretty rapidly, this adapter set is just as quick and easy to remove.  No permanent modifications are made, so it preserves resale and collectability of very clean and original machines. 

ALTEK main lamp driver boards do not require an LED adapter, only factory original main lamp drivers require LED adapters.

Some Bally titles use additional boards to control more lamps, and require additional adapter set(s) to completely convert a game. 

Spectrum:  Requires 2 of this set

Space Invaders, Xenon, Flash Gordon, Eight Ball Deluxe (All versions), Fireball II, Embryon, Fathom, Medusa, Elektra, Vector, Speakeasy, Mr. and Mrs PacMan:    Require 1 of this set, and one the -52 AUX board sets.

http://www.siegecraft.us/presta/index.php?id_product=63&controller=product&id_lang=1

Kiss,  Future Spa,  Centaur, Centaur II:  Require 1 of this set and one of the -42 AUX board sets

http://www.siegecraft.us/presta/index.php?id_product=62&controller=product&id_lang=1

Does NOT work in Gold Ball,  Baby Pacman, Granny and the Gators, or Grand Slam.

Troubleshooting Addendum:

Some customers report issues where the adapters either don't work at all, or actually make the strobing problems even worse.  This seems to be caused by one of two issues.

1:  Check continuity on the wiring harness.   I have had issues the past year or so with my wire processing equipment, resulting in bad crimps,  and potentially a bad spool of wire too.  

2: Check the voltage on the spot you're attaching the alligator clip.   It should be around 5.5v to 6v,   if it's 3v-4v,  it's way too low and the adapters won't work there.   Check other lamp locations either in the backbox or even under the playfield

MB-07 Instructions



Pinball LEDS by DRAPL, partners with Siegecraft Electronics to serve you better with you LED purchases

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

CLASSIC BALLY/STERN MA-07 LED ADAPTERS

  • Brand: DRAPL
  • Product Code: CLASSIC BALLY/STERN MA-07 LED ADAPTERS
  • Availability: 9
  • $60.00


Tags: CLASSIC BALLY/STERN MA-07 LED ADAPTERS